Information

Cab w/ AC, Heat, Stereo, Heated Air Seat, EH Controls, LED Monitor w/ Backup Camera, Panoramic Mirror, 2 Speed, Lap Bar, Performance Pkg; Front Electric, Ride Control, Self-Leveling, Hyd. Q.A., 17.7" Tracks, 84" LP Bucket, Rep. Photo
Those looking for a vertical lift loader that can take a bigger bite out of the job will like the CASE TV370B. This machine delivers large-frame CTL strength and capacity in a very efficient machine. With 74 hp, it offers operating capacity and reach that rival larger units. The maintenance-free Tier 4 Final emissions solution means no Diesel Particulate Filter (DPF) to replace and no regeneration downtime. The EZ Trac option improves comfort while boosting the tractive effort performance. And the spacious cab features easy-to-operate joystick controls and an 8-in. LCD that displays loads of machine vitals and settings. Ready to fill up more jobs?
General Specs:
ENGINE
Model FPT F5H FL463 A*G001
Emissions Certification Tier 4 Final
Type Diesel 4-stroke, Turbo, D.I.
Cylinders 4
Bore/Stroke 3.9 x 4.3 in
(99 x 110 mm)
Displacement 207 in3 (3.4 L)
Fuel injection Direct, high pressure
common rail – HPCR
Fuel #2 Diesel
Fuel filter:
Pre-filter Beta (30) = 200/spin-on
Main filter Beta (4) = 20/spin-on
Air intake Turbocharged w/ waste
gate and external cooled EGR
Exhaust aftertreatment Diesel Oxidation
Catalyst (DOC)
Cooling Liquid
Engine speeds RPM
High idle – no load 2500 +/- 25
Rated – full load 2500
Low idle 1150 +/- 25
Horsepower @ 2500 RPM – SAE J1349:
Gross 74 hp (55 kW)
Net 68 hp (51 kW)
Peak torque @ 1400 RPM 232 lb·ft (314 N·m)
Radiator:
Core type All aluminum
Core size area 2.05 ft2 (0.19 m2)
Rows of tubes x columns 31 x 4
Cap pressure 13 +/- 2 psi
(0.9 +/- 0.14 bar)
Fan:
Diameter 20.4 in (518 mm)
Ratio 0.96:1 standard, 1.1:1 high-flow
Water pump:
Style Centrifugal
Flow 29 gpm (110 L/min)
Engine lubrication pump:
Rotor pump w/ deep sump pan, plate cooler
and pressurized under-piston nozzles
Pump operating angle ratings:
Side to side 45°
Bucket up 35°
Bucket Down 45°
LIFT GEOMETRY
Vertical Lift
DRIVETRAIN
Drive pump controls Servo-assist mechanical
Pump to engine ratio 1:1
Displacement 2.81 in3 (46 cm3)
Flow @ rated engine RPM:
@ 97% efficiency 29.4 gpm (111 L/min)
Charge pressure 360 psi (24.5 bar)
System relief pressure 5,220 psi (360 bar)
Drive pump controls Electro-hydraulic
Pump to engine ratio 1:1
Displacement 2.75 in3 (45 cm3)
Flow @ rated engine RPM:
@ 97% efficiency 28.8 gpm (109 L/min)
Charge pressure 362 psi (24.5 bar)
System relief pressure 5,220 psi (360 bar)
Drive motors:
Max. displacement 3.10 in3 (50.9 cm3)
Displacement:
High speed 2.02 in3 (33.1 cm3)
Motor RPM @ high idle and 97% efficiency:
2-speed 156
Motor torque @ max. displacement and relief
pressure, calculated @ 5,220 psi (360 bar):
4,654 lb·ft (6 310 N·m)
Travel speed:
Low range 5.1 mph (8.2 kph)
High range 8.0 mph (12.9 kph)
Final drive:
Planetary gearbox w/ 2-speed motor
Tractive effort 7,414 lb (3 370 kg)
Parking brake:
Type Spring-applied, hydraulic
release multiple disc.
Engagement Depress on/off brake button
on handle or instrument panel,
raise seat bar, get off seat or stop engine.
ELECTRICAL
Alternator 120 amp
Starter 4.29 hp (3.2 kW)
Battery 12-volt low-maintenance
950 cold-cranking amps @ 0° F (-18° C°)
OPERATOR ENVIRONMENT
ROPS/FOPS Level 1 canopy w/ side screens;
Keyed start ignition; Tilt ROPS/FOPS; Rear
window w/ emergency escape; Suspension Seat,
vinyl w/ 2 in (51 mm) retractable 3 point lap seat
belt; Hand and foot throttles; Alarm package –
back-up and horn; Rearview mirror; Headliner;
Dome Light; Top window; Cup holder; 12V Power
plug socket; Foot rest; Seat pocket; Padded seat
bar w/ integral armrests; Loader control lockout
system; Electric parking brake control; Operator’s
comp